The production management system of corrugating machine is a computer control system used to assist the automatic production of corrugating machine. Detection and control, simulating manual operations, these controls include speed adjustment, gap adjustment, eating paste adjustment, raw paper material, etc., the purpose is to save manpower, increase output, reduce loss, and then achieve the purpose of planned production. It can be simply considered as a set of computer equipment used on the corrugated cardboard production line to assist each operator, improve production efficiency and reduce losses.
It is mainly the automatic control system of the corrugating machine production line, which is used to improve production efficiency, collect production data, improve product quality, reduce losses, etc. It should have the following basic functions.
To automatically receive and post orders:
Automatically receiving scheduled orders from the ERP system can improve production efficiency and accuracy. Recycling production data to the ERP system can facilitate further analysis of these data, such as machine operation rate, loss analysis, order tracking, etc.
Single tile machine automatic paper splicing control:
The use of computer-controlled automatic splicing can effectively improve the accuracy of splicing and increase the speed of the machine, thereby reducing losses and improving the operating efficiency of the corrugator.
Single-sided corrugating machine automatic paste amount control:
The automatic paste amount control can automatically adjust the paste amount according to different vehicle speeds and different materials, so as to avoid poor cardboard bonding (too little paste amount) and reduced cardboard hardness (too much paste amount due to manual adjustment of paste amount) too much) and other problems, so the jam caused by too much flyover paper when loading paper and the paper break caused by too little flyover paper. Automatic control of trimming and pressing machine
Work Guidelines:
1. The operator should have a comprehensive understanding of the working principle of the single-sided corrugating machine and the working principle of the entire corrugated line, and be skilled in operating the single-sided corrugating machine.
2. Before starting the machine, carefully check whether the circuits, air pipes and air valves are leaking, whether each instrument is sensitive, whether the indication is correct, and refueling each lubricating part.
3. Check the air pressure and glue quantity at any time during the production process, and deal with the abnormality in time, and strive to reduce unnecessary losses.
4. The tile paper is aligned with the lining paper or core paper, and the error does not exceed 3mm.
5. Both the main and auxiliary operators are responsible and obliged to solve the quality accidents and hidden dangers that may occur at any time in their positions, and cooperate well with other machine operators.
6. Keep the work site clean and tidy